Transparent LED
Holographic Screen
Dubai, UAE
Only 2 mm thin. 3 kg/m². Up to 90% transparent. Bends to any glass surface. 7 pitches P2.5 to P20. Dubai stock. In-house installation by StarLED.
Upload retail install
Upload atrium install
Upload event install
The LED Display That Is Virtually Invisible When Not Showing Content
The Holographic Invisible LED is only 2 mm thick and weighs 3 kg per m², achieving up to 90% transparency. Content appears to float on glass. At this thickness it sits on any glass surface as a near-imperceptible layer. 7 pitches from P2.5 to P20, flexible enough to bend to any curved or domed glass. Dubai stock at Al Khawaneej 2, installed by StarLED's in-house team.
- 2 mm thin, 3 kg/m²: no glass load review needed
- Up to 90% transparent: strongest holographic effect on glass
- Flexible and bendable: fits curved, domed, and cylindrical glass
- 7 pitches P2.5 to P20: close-range retail to large outdoor facades
- Colorlight and Novastar: integrates with any existing AV setup
Why Dubai Chooses Holographic LED Over Standard Transparent and Opaque Displays
Standard transparent LED achieves 65 to 75% transparency at 10 mm depth. The Holographic Invisible screen reaches 90% at just 2 mm a near-invisible layer on glass. Its flexible module bends to curved hotel canopies, domed atriums, and cylindrical facades without gaps, which rigid panels cannot achieve at any pitch.
- Zero-code Colorlight and Novastar integration: no specialist commissioning
- Flexible substrate: no gaps on curved, domed, or cylindrical surfaces
- SMD1613 and SMD2020: smallest chips for maximum transparency per pitch
- 160 degree H and V viewing angle: visible from any position around the glass
| Factor | Holographic LED | Standard Transparent | Opaque LED |
|---|---|---|---|
| Thickness | 2 mm | 10 mm | 80 to 250 mm |
| Weight per m2 | 3 kg | 7.5 kg | 20 to 45 kg |
| Max transparency | Up to 90% | 65 to 75% | 0%, solid |
| Flexible | Yes, any surface | Arc only | No |
| When off | Near-invisible | Slightly visible | Fully blocked |
| Glass load impact | 3 kg/m2 | 7.5 kg/m2 | 20+ kg/m2 |
Need a datasheet, glass load calculation, or same-day AED quote?
StarLED's Dubai team responds within 2 hours. All pitches in stock at Al Khawaneej 2.
8 Reasons Dubai Buyers Specify the Holographic Invisible LED
At 2 mm, the display integrates with glass as a near-imperceptible layer. Viewed from the side it disappears completely. No other transparent LED in Dubai achieves this level of visual integration.
At 90% transparency, content appears to float with no visible screen structure. The effect stops passersby in Dubai malls and hotel lobbies and generates social media sharing that drives brand ROI.
At 3 kg/m2, the holographic screen adds less load than a framed artwork. Most Dubai commercial glass specifications allow this without a structural engineer assessment, cutting project approval time significantly.
The module bends to curved, domed, and cylindrical glass without gaps. Dubai's luxury hotel canopies, curved retail facades, and atrium domes are all addressable without custom fabrication.
P2.5 and P3.5 for luxury retail and museum glass viewed at 2 metres. P10 and P20 for large atrium and outdoor facade glass viewed at 250 metres. One product family covers every Dubai glass application.
At 3840 Hz refresh rate, the holographic LED captures without banding or flicker on any phone or professional camera, protecting the quality of customer-generated social media content from your Dubai installation.
Zero-code technology integrates with Colorlight and Novastar media players without custom configuration. No specialist commissioning. Connects to existing AV infrastructure in any Dubai project.
Rated for 7x24 continuous operation at up to 5,000 nits. LED chip failure rate 1 in 10,000. Meets the duty cycle of Dubai retail, hospitality, and airport advertising installations that run year-round.
Holographic Invisible LED: Choose Your Pixel Pitch
All 7 pitches share the same 2 mm depth, 3 kg/m2, and 1500x250 mm module. Choose by glass area and viewing distance.
Holographic Invisible LED: Full Specifications
Official specs from the StarLED datasheet. Scroll on mobile to compare. Full PDF on request.
| Specification | Value |
|---|---|
| Pixel Pitch Options | P2.5 / P3.5 / P3.91 / P5 / P6.25 / P10 / P20 |
| Display Thickness | 2 mm |
| Screen Weight | 3 kg per m2 |
| Transparency Rate | 70% to 90% (by pitch) |
| Module Size | 1500 x 250 mm (customizable) |
| LED Chip | SMD1613 and SMD2020 |
| Screen Brightness | 2,500 to 5,000 cd/m2 |
| Refresh Rate | 3840 Hz |
| Gray Level | 16-bit |
| Viewing Angle (H/V) | 160 degrees / 160 degrees |
| Viewing Distance | 2m to 250m (by pitch) |
| Color Temperature | 5500K to 15000K (adjustable) |
| Driving Method | Static |
| Control System | Colorlight and Novastar |
| Power Supply | YUANCHI |
| Power Consumption | Average 300W/m2, Max 800W/m2 |
| Power Requirements | 110 to 220V +/- 10%, AC50/60Hz |
| IP Rating | IP45 |
| Installation | Adhering to glass, hanging |
| Flexible | Yes, bends to any surface |
| Average Lifespan | 100,000 hours |
| Trouble-Free Operating | 10,000 hours |
| Operating Temp | -20 to +50 degrees C |
Where the Holographic Invisible LED Is Used
Anywhere glass meets brand content and the display must disappear when off.
Content floats on glass while the merchandise window stays visible at 70 to 75 percent transparency. The holographic effect stops mall corridor traffic and drives social media sharing that opaque signage cannot achieve.
80 to 82 percent transparency maintains natural light and visual openness across large atrium glass. Brand content runs at 2,500 to 5,000 nits, visible across all Dubai mall ambient lighting conditions.
The flexible substrate conforms to curved hotel entrance canopies and domed glass structures without custom fabrication, creating the holographic floating-content effect on complex architectural glass shapes.
At 3 kg/m2, the holographic screen imposes no structural load on curtain wall glass. The vehicle or merchandise remains the focal point while digital content plays simultaneously on the same glass.
Hanging installation allows the 2 mm display to suspend within glass exhibition booths without floor contact. Floating holographic walls define brand zones without obstructing exhibition sightlines.
P10 and P20 achieve 88 to 90 percent transparency for stadium glass and outdoor facades viewed at 10 to 250 metres. At 2 mm depth the display is invisible from any angle when viewed from the side.
Holographic Invisible LED Installations
Specified, supplied, and installed by StarLED's in-house Dubai team. No subcontractors.
How to choose pitch, plan installation, match brightness to your glass, and set up content scheduling for Dubai retail and hospitality hours.
Dubai Stock. In-House Team. 5-Year Warranty.
All 7 pitches stocked at Al Khawaneej 2. Most projects delivered and installed within the same week as confirmation. Bring any comparable written quote and StarLED will beat it in writing.
StarLED's own Dubai team plans glass adhesion, hanging alignment, cable routing, and edge finishing. No subcontractors. We commission on-site and confirm uniformity before handover.
We review your glass dimensions, site lighting, and content type before recommending the right pitch. We also advise on content creation so the holographic effect reads as premium, not pixelated.
Full 5-year warranty backed by our local Dubai team. Replacement modules for all 7 pitches stocked at Al Khawaneej 2 for same-week dispatch to any active UAE installation.
We challenge any UAE-based price. Seen a lower quote?
Show us, we’ll beat it. You don’t need to go to China. We’ve already brought the factory to you.
Come See It in Action
Want to see the quality before you decide? Visit our Dubai facility and experience a live demo.
Why book with us?
- Ready stock in Dubai & UAE for faster delivery
- In-house engineers for installation & setup
- Transparent pricing, no hidden costs
- Full after-sales support and warranty
Frequently Asked Questions
Common questions from Dubai buyers specifying the Holographic Invisible Transparent LED Display for the first time, answered by StarLED's in-house Dubai team.