The LED Display That Is Virtually Invisible When Off
The Holographic Invisible LED is only 2 mm thick and weighs 3 kg per m², achieving up to 90% transparency. Content appears to float on glass. At this thickness it sits on any glass surface as a near-imperceptible layer. Seven pitches from P2.5 to P20, flexible enough to bend to any curved or domed glass. Dubai stock at Al Khawaneej 2, installed by StarLED's in-house team.
- 2 mm thin, 3 kg/m² — no glass load review needed
- Up to 90% transparent — strongest holographic effect
- Flexible — fits curved, domed, cylindrical glass
- Colorlight & Novastar — plug into any AV setup
8 Reasons Dubai Buyers Specify the Holographic Invisible LED
At 2 mm, the display integrates with glass as a near-imperceptible layer. Viewed from the side it disappears completely. No other transparent LED in Dubai achieves this level of visual integration.
At 90% transparency, content appears to float with no visible screen structure. The effect stops passersby in Dubai malls and hotel lobbies and generates social-media sharing that drives brand ROI.
At 3 kg/m², the holographic screen adds less load than a framed artwork. Most Dubai commercial glass specifications allow this without a structural engineer assessment, cutting project approval time significantly.
The module bends to curved, domed, and cylindrical glass without gaps. Dubai's luxury hotel canopies, curved retail facades, and atrium domes are all addressable without custom fabrication.
P2.5 and P3.5 for luxury retail and museum glass viewed at 2 metres. P10 and P20 for large atrium and outdoor facade glass viewed at 250 metres. One product family covers every Dubai glass application.
At 3840 Hz, the holographic LED captures without banding or flicker on any phone or professional camera, protecting the quality of customer-generated social-media content from your Dubai installation.
Zero-code technology integrates with Colorlight and Novastar media players without custom configuration. No specialist commissioning. Connects to existing AV infrastructure in any Dubai project.
Rated for 24/7 continuous operation at up to 5,000 nits. LED chip failure rate 1 in 10,000. Meets the duty cycle of Dubai retail, hospitality, and airport advertising installations that run year-round.
Holographic Invisible LED: Choose Your Pixel Pitch
All seven pitches share the same 2 mm depth, 3 kg/m², and 1500×250 mm module. Choose by glass area and viewing distance.
- Viewing2–50 m
- Brightness2,500–5,000 nits
- Refresh3840 Hz
- Viewing3–80 m
- Brightness2,500–5,000 nits
- Refresh3840 Hz
- Viewing3–100 m
- Brightness2,500–5,000 nits
- Refresh3840 Hz
- Viewing5–120 m
- Brightness2,500–5,000 nits
- Refresh3840 Hz
- Viewing6–150 m
- Brightness2,500–5,000 nits
- Refresh3840 Hz
- Viewing10–200 m
- Brightness2,500–5,000 nits
- Refresh3840 Hz
- Viewing20–250 m
- Brightness2,500–5,000 nits
- Refresh3840 Hz
Holographic Invisible LED: Full Specifications
| Specification | Value |
|---|---|
| Pixel Pitch Options | P2.5 / P3.5 / P3.91 / P5 / P6.25 / P10 / P20 |
| Display Thickness | 2 mm |
| Screen Weight | 3 kg per m² |
| Transparency Rate | 70% to 90% (by pitch) |
| Module Size | 1500 × 250 mm (customisable) |
| LED Chip | SMD1613 and SMD2020 |
| Brightness | 2,500 to 5,000 cd/m² |
| Refresh Rate | 3840 Hz |
| Grayscale Depth | 16-bit |
| Viewing Angle (H/V) | 160° / 160° |
| Viewing Distance | 2 m to 250 m (by pitch) |
| Color Temperature | 5500K to 15000K (adjustable) |
| Driving Method | Static |
| Control System | Colorlight & Novastar |
| Power Supply | YUANCHI |
| Power Consumption | Average 300 W/m², Max 800 W/m² |
| Power Requirements | 110–220 V ± 10%, AC 50/60 Hz |
| IP Rating | IP45 |
| Installation | Adhering to glass, hanging |
| Flexible | Yes — bends to any surface |
| Average Lifespan | 100,000 hours |
| Operating Temperature | -20 to +50 °C |
Request a project-specific datasheet for your Dubai installation.
Luxury Retail Installation
See Our Transparent LED Displays in Action at Dubai’s Premier Showrooms
Where the Holographic Invisible LED Performs Best
Content floats on glass while merchandise stays visible at 70–75% transparency. The holographic effect stops mall corridor traffic and drives social-media sharing that opaque signage cannot achieve.
80–82% transparency maintains natural light and visual openness across large atrium glass. Brand content runs at 2,500–5,000 nits, visible across all Dubai mall ambient lighting conditions.
The flexible substrate conforms to curved hotel entrance canopies and domed glass structures without custom fabrication, creating the holographic floating-content effect on complex architectural glass.
At 3 kg/m², the holographic screen imposes no structural load on curtain wall glass. The vehicle or merchandise remains the focal point while digital content plays simultaneously on the same glass.
Hanging installation allows the 2 mm display to suspend within glass exhibition booths without floor contact. Floating holographic walls define brand zones without obstructing exhibition sightlines.
P10 and P20 achieve 88–90% transparency for stadium glass and outdoor facades viewed at 10–250 metres. At 2 mm depth the display is invisible from any angle when viewed from the side.
Holographic LED Projects in the UAE
Every installation specified, supplied, and completed by StarLED's in-house Dubai team.
Holographic LED vs Other StarLED Display Options
IS Series creates a walkable brand experience in Dubai malls and hotel lobbies. 2,000 kg/m² load, 33 ms touch response. Specify alongside the Holographic LED for complete glass-and-floor digital environments.
View IS Series →TQ Series at 7,000 nits and IP67 for outdoor billboard and facade applications where transparency is not required. Choose TQ when the display replaces the glass surface entirely and maximum daylight brightness is the priority.
View TQ Series →XAO Series Black Rhino for solid wall installations in boardrooms, lobbies, and corporate spaces. 94% blackness, 8,000–10,000 nits peak, IP68 rated. Choose XAO where the display surface is a wall, not glass.
View XAO Series →Why Choose StarLED for Holographic LED in Dubai?
All seven pitches stocked at Al Khawaneej 2. Most projects delivered and installed within the same week as confirmation. Bring any comparable written quote and we'll beat it in writing.
StarLED's own Dubai team plans glass adhesion, hanging alignment, cable routing, and edge finishing. No subcontractors. We commission on-site and confirm uniformity before handover.
We review your glass dimensions, site lighting, and content type before recommending the right pitch. We also advise on content creation so the holographic effect reads as premium, not pixelated.
Full 5-year warranty backed by our local Dubai team. Replacement modules for all seven pitches stocked at Al Khawaneej 2 for same-week dispatch to any active UAE installation.
Ready to Work Together? Transform your business with us!
We challenge any UAE-based price. Seen a lower quote?
Show us, we’ll beat it. You don’t need to go to China. We’ve already brought the factory to you.
Come See It in Action
Want to see the quality before you decide? Visit our Dubai facility and experience a live demo.
لماذا نحن؟
- Ready stock in Dubai & UAE for faster delivery
- فريق من المهندسين المتخصصين يتولى أعمال التركيب والإعداد باحترافية عالية
- نلتزم بتسعير واضح وشفاف يضمن لك عدم وجود أي تكاليف خفية
- نقدم دعمًا متكاملًا بعد البيع مع ضمان شامل يمنحك راحة وثقة مستمرة
Frequently Asked Questions
Common questions from Dubai buyers specifying the Holographic Invisible Transparent LED Display for the first time, answered by StarLED's in-house Dubai team.