Pick the pixel pitch by the closest distance a normal viewer will stand. As a rule of thumb, the pitch in millimetres is about the minimum comfortable viewing distance in metres. P2.5 suits people about 2.5 m away, P4 suits about 4 m, and P6 and above suits shopfronts and outdoor screens seen from 6 m or more. Then choose the screen size so the resolution fits your content.
If you’ve collected LED screen quotes in Dubai, you’ve seen the letters and numbers: P1.5, P2.5, P3.9, P6.6. They decide how sharp the screen looks and most of what it costs. Yet most quotes never explain why they picked the one they did.
This guide does. In plain words, with a table you can use on your own site visit.
What is pixel pitch?
An LED screen is made of thousands of tiny LED pixels. Pixel pitch is the distance from the centre of one pixel to the centre of the next, in millimetres.
- Smaller pitch (P1.2, P1.5, P1.8): pixels packed tightly, sharper up close, more LEDs, higher cost.
- Larger pitch (P4, P6, P8, P10): pixels further apart, made to be seen from a distance, fewer LEDs, lower cost.
Think of it like a newspaper photo. Up close you see the dots. Hold it at arm’s length and the dots blend into a picture. Pixel pitch decides how far “arm’s length” is for your screen.
The rule of thumb: pitch in mm = distance in metres
On every StarLED site visit, we start with one simple rule:
The pixel pitch in millimetres is roughly the closest distance, in metres, a viewer should comfortably stand.
| Pixel pitch | Closest comfortable viewing | Typical UAE use |
| P0.9 to P1.5 | 1 to 1.5 m | Boardrooms, control rooms, luxury retail counters, reception desks |
| P1.8 to P2.5 | 2 to 2.5 m | Shops, restaurants, hotel lobbies, clinics, auditoriums |
| P2.9 to P3.9 | 3 to 4 m | Mall atriums, event stages, large lobbies, rental walls |
| P4 to P6.6 | 4 to 7 m | Window-facing shopfronts, facades, large indoor halls |
| P8 to P10+ | 8 m and beyond | Roadside and rooftop screens, stadium boards |
It’s a starting point, not a law. A screen showing bold text or video forgives a slightly larger pitch. A screen showing small text, prices or spreadsheets needs a slightly smaller one.
Why “closest normal viewer” matters
Every space has three distances:
- The closest possible viewer. Someone pressing their nose to the screen. Ignore them.
- The closest normal viewer. The customer at the counter, the front row, the person at the meeting table. Size the pitch for them.
- The main audience. The queue, the passing traffic, the back row. Check the screen works for them too.
Tip: walk the space with a tape measure before you ask for quotes. Write down distance 2 and distance 3. It’s the single most useful thing you can give a supplier.
The most expensive mistake: too fine a pitch
Most people worry about buying a pitch that’s too coarse. The screen looks pixelated and cheap. That happens.
But the more common and more costly mistake is the opposite: paying for a fine pitch that nobody will ever stand close enough to see.
A P1.5 wall in a mall atrium where the nearest shopper is 8 metres away. A P2.5 window screen read from the other side of a road. On site, nobody can tell the difference from a coarser pitch. The extra cost could have bought a bigger screen, a better spot or professional content.
How screen size and pitch work together
The pitch and the width of the screen decide the resolution.
Resolution across = screen width in mm ÷ pixel pitch in mm.
| Wall width | At P1.8 | At P2.5 | At P4 |
| 2.4 m | about 1,290 px | about 960 px | about 600 px |
| 3.84 m | about 2,130 px | about 1,540 px | about 960 px |
| 4.8 m | about 2,580 px | about 1,920 px | about 1,200 px |
So a 4.8 m wide wall at P2.5 gives you roughly full HD width (1,920 pixels). The same wall at P1.8 goes beyond full HD.
Why does that matter? Because your content has a resolution too. If your videos are made in 1920 x 1080 and the wall is 1,200 pixels wide, they’ll be scaled down. If the wall is 2,580 pixels wide, they’ll be scaled up, which is fine for video but can soften small text.
Tell your supplier what your content looks like. A good one will match the size and pitch so it fills the wall cleanly.
A real example: an auditorium wall
For the [Youth Hub] auditorium, the front row sat about [3] metres from the stage and the back row about [15] metres.
We chose a 4.8 x 2.4 m wall at P1.8 (1.86 mm), built from SPad aluminium cabinets of 640 x 480 mm, for a resolution of 2580 x 1290 pixels.
Why not P2.5? Slides with small text are shown from the front row. Why not P1.2? Nobody in that room sits close enough to see the difference, and the cost would have climbed for no visible gain.
Indoor vs outdoor changes the answer
Outdoor screens almost always use a larger pitch, because people see them from further away and because outdoor modules need bigger, brighter LEDs to beat the sun.
- Shopfront facing a busy pavement: often P3 to P4 outdoor.
- Facade or roadside screen seen from across the street: P6 to P10.
For outdoor screens, brightness and weather sealing matter as much as pitch. See our outdoor LED display.
What about SMD and COB?
Pitch tells you how far apart the pixels are. SMD and COB describe how the LEDs are mounted. At fine pitches (around P1.8 and below), COB is popular because it’s smoother and tougher up close. At larger pitches, SMD dominates. Read SMD vs COB: which one do you need?
Questions to ask any supplier about pitch
- What viewing distance did you assume for this pitch?
- What resolution will this wall give me?
- What would one step coarser save, and would anyone notice?
- Will my existing content fit this resolution cleanly?
If the answer to the first question is “it’s our best seller”, keep asking.
In short
Measure where people stand. Pick the pitch for the closest normal viewer. Size the wall so the resolution matches your content. Spend the difference on what people will actually notice.
Why choose StarLED for your LED screen
- We start with your space, not a price list. Every quote is based on viewing distance, light and content.
- Stock in Dubai. Standard jobs are installed within 2 days of sign-off.
- 400+ installations in 4 years across the UAE and GCC, for clients including Dubai Opticals, VFS Global, Life Care Hospital and Royal Academy.
- Our own crew installs and services every screen.
- Warranty up to 5 years, serviced by our team in the UAE.
Get the right pitch for your space
Send us a photo of your wall and tell us where people stand. We’ll recommend the pitch and size that fit, and tell you which ones you don’t need. Contact us for custom pricing.
Your screen should be sharp where people are, not where they aren’t.
Frequently asked questions
What pixel pitch do I need for a shop in Dubai?
Most indoor shop screens work well at P1.8 to P2.5, because customers stand about 2 to 3 metres away. A window-facing screen seen from the pavement often suits P3 to P4 with higher brightness. Measure where your customers stand and pick the pitch for the closest normal viewer.
Is a smaller pixel pitch always better?
No. A smaller pitch is sharper up close but costs more. If nobody stands close enough to see the difference, you pay extra for nothing. The right pitch matches the viewing distance.
How do I calculate the resolution of an LED wall?
Divide the screen width in millimetres by the pixel pitch in millimetres. A 4,800 mm wide wall at P2.5 gives about 1,920 pixels across. Do the same for the height.
What is the best pixel pitch for an outdoor LED screen?
Most outdoor screens in the UAE use P4 to P10, depending on how far away people are. Shopfronts close to the pavement can use P3 to P4. Roadside and rooftop screens seen from a distance use P6 to P10.
Can I use the same pitch indoors and outdoors?
The pitch can be similar, but the module must be different. Outdoor modules are much brighter and sealed against heat, dust and rain. An indoor module used outdoors will wash out and fail early.

